Labels:text | screenshot OCR: TAXI! Once you have found a taxi, walk forward as if you are going to bump into it. You will enter the taxi automatically. Manually driving a taxi If you have no addresses in your City Mapper, you can try driving manually. Press forward (up) to drive forward. Press back (down) to stop. Left will turn left, and right will turn right but only if a junction is immediately ahead. You are not allowed to drive the wrong way down one way streets. If the taxi comes to a stop line (e.g. at a T junction) it will stop and wait for further directions. The taxi will also stop at a roundabout and wait for directions. Pressing right or forward will make the taxi go round the roundabout. Only by pressing left when an exit is ahead on the left will the taxi leave the roundabout. To stop the car, press back to bring it to a halt. To step out press the flat top right switch. Using the Mapper in a Taxi If you have a programmed City Mapper, select the fourth button on the device. This will produce a new head up display (H.U.D) in the Main View. Go through the available memories until you have the appropriate address. Now select the small icon which looks like a tick (check) mark. The Taxi will now drive you there. When the 34
(.png)
